Rockville 864 Stage Panel

Beam for Live
1

Hello I have some Rockville 864 Stage Panels that when on the 39 channel mode have 16 individual cells, 8 being RGB square cells and 8 being white shocker cells, I would like to control the intensity of each of these individually via beam, the closest I’ve gotten is lighting up the bottom right cell and controlling the Red with the strobe, the green with the program, and the blue with the program speed, so clearly im pretty far off.

Any tips welcome

2

Rockville Test 5.sbf (7.4 KB) This is the profile I made that controls the bottom right cell, not sure what I am doing wrong

3

Hey there! Beam already comes with a factory profile for the Rockville 864 Stage Panel with a 39-channel mode. Considering it’s a fixture profile with cells and subcells, this requires a specific setup in order to be able to control the (sub)cells and the respective modulations.

I’ve made a simple example of a Live Set and Beam Patch that uses the 39-channel mode:
Rockville Stage Panel 864 LED Example Project.zip (52.8 KB)

Notice how the different modulations for the different layers are controlled:

  • “Panel Main” track:
    • Has Intensity set to 1.
  • “Panel RGB” track:
    • Supports program, programspeed and stroberate modulations.
  • “Panel Strobe” track:
    • Supports program, programspeed and stroberate modulations.
  • “Panel RGB Pixels” track:
    • You can set the color for the segments using the color picker.
    • Use MIDI notes to trigger each RGB segment separately, following the intensity envelope.
  • “Panel Strobe Pixels” track:
    • Use MIDI notes to trigger each strobe segment separately, following the intensity envelope.

Let me know if you have any questions!

4

Figured it out, wasnt using the cell and sub cell settings properly, wanted to start from my own fixture profile to have maximum control