.DMX Beam.maxpat (260.0 KB)
Neewer TL60 V2.sbf (14.5 KB)
Hi there,
I just had a quick question wondering if might it be possible to get Mode 6 (8 Pixel Mode) added for the Neewer TL60 light by any chance?
I’ve been trying to build a custom profile with Fixture Editor, but it can’t seem to recognize each individual pixel with full RGBWI capabilities. I’m guessing this is because there’s only 5 mapping slots on the fixture editor, where as Mode 6 according to the DMX channel table says there’s 56 channels for all 8 pixels. I’m really not sure at the moment.
I’ve also been trying to use “beam.matrix” as well for the pixels, but can’t seem to figure out how that’s supposed to be setup either for this particular light when it comes to the 8 pixel mode.
I’ve attached the .sbf file I’ve been modifying for this purpose, along with my Max 9 patch.
Also, here’s the mapping for Mode 6 according to the “DMX Channel Table” manual from Newwer’s website:
Pixel 1
n1 = Mode Selection - 78-115 (31%-45%)
n2 = Brightness 0-255
n3 = Red Intensity
n4 = Green Intensity
n5 = Blue Intensity
n6 = Cool White Intensity
n7 = Warm White Intensity
Pixel 2
n8 = Mode Selection - 78-115 (31%-45%)
n9 = Brightness 0-255
n10 = Red Intensity
n11 = Green Intensity
n12 = Blue Intensity
n13 = Cool White Intensity
n14 = Warm White Intensity
Pixel 3
n15 = Mode Selection - 78-115 (31%-45%)
n16 = Brightness 0-255
n17 = Red Intensity
n18 = Green Intensity
n19 = Blue Intensity
n20 = Cool White Intensity
n21 = Warm White Intensity
Pixel 4
n22 = Mode Selection - 78-115 (31%-45%)
n23 = Brightness 0-255
n24 = Red Intensity
n25 = Green Intensity
n26 = Blue Intensity
n27 = Cool White Intensity
n28 = Warm White Intensity
Pixel 5
n29 = Mode Selection - 78-115 (31%-45%)
n30 = Brightness 0-255
n31 = Red Intensity
n32 = Green Intensity
n33 = Blue Intensity
n34 = Cool White Intensity
n35 = Warm White Intensity
Pixel 6
n36 = Mode Selection - 78-115 (31%-45%)
n37 = Brightness 0-255
n38 = Red Intensity
n39 = Green Intensity
n40 = Blue Intensity
n41 = Cool White Intensity
n42 = Warm White Intensity
Pixel 7
n43 = Mode Selection - 78-115 (31%-45%)
n44 = Brightness 0-255
n45 = Red Intensity
n46 = Green Intensity
n47 = Blue Intensity
n48 = Cool White Intensity
n49 = Warm White Intensity
Pixel 8
n50 = Mode Selection - 78-115 (31%-45%)
n51 = Brightness 0-255
n52 = Red Intensity
n53 = Green Intensity
n54 = Blue Intensity
n55 = Cool White Intensity
n56 = Warm White Intensity
Any help with getting this sorted out would be greatly appreciated!