Hi,
The fact that you are not seeing your light turn on is most likely due to one of these two reasons:
-
Did you specify the correct IP address for your Art-Net node? You can see if the ODE MK2 is receiving Art-Net data if the ACTIVITY light on the node is blinking.
-
You are using a fixture profile with a channel layout that doesn’t match your fixture.
Looking at the DMX implementation of your fixture, I see it has 4/5/6/9/10-channel modes.
On the other hand, the Stairville LED Par profile (that comes with Beam) only has 3 channels (red, green, blue). Except in the 4-channel mode, this will not be enough to make your light turn on - the 5/6/9/10-channel modes also require the Dimmer channel to be active. Either way, it is best to use a fixture profile that exactly matches your fixture.Here are the 6-channel and 10-channel mode profiles for your fixture:
ADJ Mega Par Profile Plus - 6ch.sbf (1.2 KB)
ADJ Mega Par Profile Plus - 10ch.sbf (1.8 KB)Please try one of these (after you have set the corresponding DMX channel mode on your fixture) and see if you are able to turn the light on.
I would recommend also having a look at Beam’s Monitor to confirm that Beam is actually sending any DMX after turning the Intensity up in a device in Live. When the color is set to white and Intensity is at 100%, the values in the Monitor (for your fixture in the 6 or 10 channel mode) should look like this:
Let me know if any of this helps.