# Mapping of RGBW LED strip

**URL:** <https://forum.showsync.com/t/mapping-of-rgbw-led-strip/2440>\
**Category:** Beam for Max\
**Created:** [June 3, 2025, 6:33am UTC](https://forum.showsync.com/t/mapping-of-rgbw-led-strip/2440 "2025-06-03T06:33:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Piedro78](https://forum.showsync.com/letter_avatar_proxy/v4/letter/p/c4cdca/32.png) [@Piedro78](https://forum.showsync.com/u/Piedro78)\
**Post date:** [June 3, 2025, 6:33am UTC](https://forum.showsync.com/t/mapping-of-rgbw-led-strip/2440/1 "2025-06-03T06:33:38Z")

</div>

Hello,

I’m struggling to build a patch to control only RGBW pixels.  
I need to pixel control the strip in 1 specific way.  
The whole strip (128 pixels) is 1 color (let’s say Green) and I want the whole strip to change to RED but pixel by pixel over a certain amount of time.  
If that time would be 128sec, every second 1 pixel should change to red so after 128sec the whole strip is red.  
Is this possible with Beam and could the change also be with a fade? Like an “line” object?

---

<div class="post-metadata">

**Author:** ![Luka](https://forum.showsync.com/user_avatar/forum.showsync.com/luka/32/197_2.png) [@Luka](https://forum.showsync.com/u/Luka)\
**Post date:** [June 10, 2025, 12:12pm UTC](https://forum.showsync.com/t/mapping-of-rgbw-led-strip/2440/2 "2025-06-10T12:12:59Z")

</div>

Hi @Piedro78, the best way to build this would probably be using `beam.matrix`, which lets you use Jitter to create graphics and pixel-map them onto your fixtures. Have you already tried this approach?
