# Controlling modulation parameter with notes

**URL:** <https://forum.showsync.com/t/controlling-modulation-parameter-with-notes/2604>\
**Category:** Beam for Live\
**Created:** [October 31, 2025, 11:59am UTC](https://forum.showsync.com/t/controlling-modulation-parameter-with-notes/2604 "2025-10-31T11:59:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bulipap](https://forum.showsync.com/user_avatar/forum.showsync.com/bulipap/32/1616_2.png) [@bulipap](https://forum.showsync.com/u/bulipap)\
**Post date:** [October 31, 2025, 11:59am UTC](https://forum.showsync.com/t/controlling-modulation-parameter-with-notes/2604/1 "2025-10-31T11:59:26Z")

</div>

Hi!

When I create a fixture profile for my lamp, the assigned MIDI Note automatically controls the intensity of the lamp.

In the manual, I read that you also can control a modulation parameter with a note, but the manual doesn’t say how to do that. How do I assign a modulation parameter to a note?

Kind regards,

Emanuel

---

<div class="post-metadata">

**Author:** ![Luka](https://forum.showsync.com/user_avatar/forum.showsync.com/luka/32/197_2.png) [@Luka](https://forum.showsync.com/u/Luka)\
**Post date:** [November 9, 2025, 3:56pm UTC](https://forum.showsync.com/t/controlling-modulation-parameter-with-notes/2604/2 "2025-11-09T15:56:44Z")

</div>

Hi Emanuel, welcome!

You can do that using the Generic instrument device, by assigning the desired parameter to one of the two envelopes:

 ![image](https://forum.showsync.com/uploads/default/original/2X/1/1f7f24b33cc44219377f6723d0046c645cfa5bbe.png)

In the manual this is mentioned [here](https://support.showsync.com/beam-for-live/device-reference/instruments#generic), under the **Envelopes** tab.
