# Can I dim the output of beam.catch

**URL:** <https://forum.showsync.com/t/can-i-dim-the-output-of-beam-catch/1883>\
**Category:** Beam for Max\
**Created:** [October 14, 2024, 11:42pm UTC](https://forum.showsync.com/t/can-i-dim-the-output-of-beam-catch/1883 "2024-10-14T23:42:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![\_mj](https://forum.showsync.com/user_avatar/forum.showsync.com/_mj/32/1150_2.png) [@\_mj](https://forum.showsync.com/u/_mj)\
**Post date:** [October 14, 2024, 11:42pm UTC](https://forum.showsync.com/t/can-i-dim-the-output-of-beam-catch/1883/1 "2024-10-14T23:42:35Z")

</div>

how can I dim the output of beam.catch

---

<div class="post-metadata">

**Author:** ![hidde](https://forum.showsync.com/user_avatar/forum.showsync.com/hidde/32/40_2.png) [@hidde](https://forum.showsync.com/u/hidde)\
**Post date:** [October 15, 2024, 6:16am UTC](https://forum.showsync.com/t/can-i-dim-the-output-of-beam-catch/1883/2 "2024-10-15T06:16:57Z")

</div>

I would suggest two approaches:

One (maybe obvious) approach is to modify the audio signal going into beam.catch. Here, I reduce the amplitude of the audio signal so that the light becomes less bright.  
 ![ModifyAudioSignal](https://forum.showsync.com/uploads/default/original/2X/d/db9f8b870dfa8ec72c9eed9fb85d336350235933.png)

Another approach is to use beam.op. In this example, I multiply the `dim` signal with 0.5. As a result, the light becomes less bright as well.  
 ![ModifyBeamSignal](https://forum.showsync.com/uploads/default/original/2X/4/4589e7bd4442bfcd69f25b83782faeecd3ee45aa.png)

Both patches I shared should result in the same DMX signals. So you can choose either approach depending on which one fits best with your patch.
